A washdown service is a method of cleaning industrial equipment with a stream of hot water and chemicals. The goal of the process is to remove bacteria and contaminants from industrial equipment. The washdown service can be performed on multiple machines. The equipment needs to be cleaned frequently, as the cleaning agents will gradually wear down the equipment. The hoses can range from 75 to 300 feet in length. The hoses used during this process can be as short as three feet or as long as four inches, depending on the type of work that is required. A good washdown service uses well-designed equipment. Hygienically designed equipment has few crevices and mirror-smooth surfaces that are difficult for bacteria to grow. For example, 316 stainless steel is the gold standard in sanitation. Unlike copper, the smooth surface of 316 stainless steel makes it difficult for bacteria to grow. Aluminium is another common material used for washdown services because it doesn’t conduct electricity. Lastly, synthetic polymers offer corrosion resistance and impermeability. Flyttevask Bergen The washdown service should also have specialized equipment for washing down equipment. High-pressure sprays are best used for the electronics industry, since they can remove dirt and sludge without causing damage to the equipment. The sprays used in this process are usually made of a high-quality material. These materials will be resistant to rust, corrosion, and other contaminants. Choosing the right type of equipment for your washdown service can be an essential investment. A washdown service is a great investment for any business. Proper equipment will make the process more efficient. For example, hygienically designed equipment will have minimal crevices and a mirror-smooth surface that makes it more difficult for bacteria to grow. It is also better for the environment if the equipment is made of 316 stainless steel, which has a smoother finish than copper. Deionized water is ideal for electronics manufacturers, as it doesn’t conduct electrical currents. After the washdown, the fluid is pumped away from the site. Properly-designed equipment can also make the process easier. In hygienically designed equipment, there are no crevices, and the surfaces are mirror-smooth. This means that a high-pressure washdown can splatter harmful bacteria onto the equipment. A low-pressure washdown is much safer than a high-pressure spray. The cleaners should be careful to avoid contaminating the equipment with corrosive agents. Most wash down services use high-pressure water to remove bacteria and other materials. Typically, this method uses deionized water, which is electrically inert. The contaminated fluid is then pumped to another location where it is less likely to cause damage. The hygienically designed equipment is also safe. A high-pressure spray can leave a film of bacteria and other harmful substances on equipment, which may compromise its sanitization efforts.