Essentials Roofing Tools and Equipment

Here are all of the tools roofers needs:

Roofing nail guns. Hammer tacker stapler. Roofing hammer or hatchet. Air compressor. Roofing blade or utility knife. Roofing shovel or shingle tear-off tool. Scoop shovel. Pry bar. Tarps. Chalk line tools (reel and chalk). Measuring tape or laser tool. Caulking gun or cement bucket and trowel. Tin snips. Reciprocating saw and buzz saw. Sawhorses. Drill (cordless, electric, or air). Generator. Ladders and extension ladders. Ladder hoist. Hard hats. Safety harnesses and every other personal protective equipment. Roofing shoes or boots (steel-toed-shoes with soft soles). Roof brackets or toe boards. Rake. Broom. Magnetic sweeper. Truck.

Click here to contact the best Roofing Company

Nail Guns and Roofing Hammers or Hatchets

Most roofers will use nail guns for applying shingles and other nailing work. Nail gun safety may be a concern, but most roofers find that nail guns are faster than hammers. However, there are still many roofers preferring to use roofing hammers or hatchets. If you select to use nail guns, you’ll still get to have a roofing hammer available for other nailing tasks or for when holding a nail gun could be more encumbering than it’s worth.

Hammer Tacker Stapler

Felt underlayment could also be installed with staples, or cap nails, counting on your code requirements. If you employ staples, you’ll need a staple gun. If you’re using air nail guns, it is sensible to also use an air staple gun. There are even 2-in-1 nail and staple guns.

When you install felt underlayment, you furthermore may get to add plastic or metal caps that are 1 inch in diameter. These caps prevent water from getting beneath the underlayment within the event of a tear.

Air Compressor If you select to use pneumatic nail guns, you’ll also need a roofing compressor to take care of proper pressure in your tools in the least times. you’ll be tempted to get a nailer-compressor combo tool that doesn’t need a compressor. However, these tools don’t maintain pressure long enough to finish a roofing job. Plus, the air cartridges are expensive. Remember that any delay in the work site will cost you parturient time and missed opportunities for more work. Having a compressor available at the least times is far more convenient.

As your business expands, you’ll be running quite a couple of nail guns directly. If so, you’ll need a reserve air tank, also called a “pig” air tank which will supply the additional air you’ll get to keep all of the nailers running directly. Buying a reserve tank could also be less expensive than buying a replacement compressor.

A Shingle Cutter: Either Roofing Blade or Utility Knife

Roofers need utility knives or roofing hook blades for several jobs, including as shingle cutters. If you put in 3-tab shingles, you’ll get to cut the shingles in sections to make hip and ridge shingles. regardless of which shingle you employ, you’ll also get to cut a roof underlayment also as an ice and water protector. A utility knife may be a fine choice that will handle the work, but a roofing knife may be a bit more specialized and makes your job easier. Roofing blades have special hooks near the sting to assist you to control the cut when you’re performing on thicker material, like shingles.

Scoop Shovel, Roofing Shovel, or crowbar

Scoop shovels are large, deep shovels without some extent, as against the flat, pointed landscaping shovels meant to dig. A roofer can use a scoop to maneuver loose shingles into a dumpster.

A scoop could also be your most suitable option initially because it’ll be cheap and can get the work done. However, you ought to also consider roofing shovels or tear-off shovels. These specialized tools are the simplest roofing tear-off tools you’ll get. they need steel teeth to assist you to lift old shingles off the roof and sweep them right down to the dumpster or tarp. Some even have angled faces so you don’t need to crouch the maximum amount to use them.

You may want to take a position during a crowbar too. Pry bars are usually far better at removing nails and choose shingles when you’re doing repair jobs and don’t want to tug the entire roof off. If you’ve got a roofing hammer, you’ll use the claw as your roofing nail puller instead. You’ll need to find the mixture that works best for you.

Tarps During any roofing job, you’ll get to have tarps available just in case you’ve got worse weather than expected that forestalls you from continuing the work. You’ll use the tarps to guard any exposed portions of your customer’s roof to stay it safe from water damage.

Tarps also are very useful for other tasks during a roof tear-off. you’ll lay tarps down as preparation before a re-roof job. Lay them on the bottom over the landscaping, and that they will collect shingle pieces and stray nails. Tarps make cleaning up much easier and may protect fragile plants, which your customer will appreciate.

Click here to contact the best Roofing Tampa